1000 MCM Copper XHHW-2

In stock: Black jacket on Bulk Reels.

Custom Construction: Usually less than 3 weeks to manufacture

1000 MCM Copper XHHW-2 Features:

600 Volt – UL.
Copper conductor.
Cross-linked polyethylene (XLP) insulation.
High-heat and moisture resistant.
Available in all colors.
Available with custom printing and stripes.
Available with Custom (MC) Metal Clad Armor.

1X. – 1000 MCM Copper XHHW-2 Colors:
Black. Red. White. Blue. Green. Purple. Yellow. Orange. Brown. Gray.

1X. – 1000 MCM Copper XHHW-2 Striped?: Yes – 1 additional day to custom stripe.

1X.- 1000 MCM Copper XHHW-2 Applications:
1000 MCM Copper XHHW-2 and all types of XHHW-2/RW90 building wire is intended for general purpose applications. It can be used in conduit, underground in conduit, or other recognized raceways. 1000 MCM Copper XHHW-2 is used for services, feeders, and branch-circuit wiring. 1000 MCM Copper XHHW-2 can be used in all applications as specified in National Electric Code – NEC.

1000 MCM Copper XHHW-2 /RW90 is permitted for 600 volt applications and can be used in wet or dry locations. If you need to direct bury your 1000 MCM please ask for XLP— USE RHH-RHW-2 in place of XHHW-2. 1000 MCM Copper XHHW-2 should be used in environments where temperatures are not to exceed 90C.

1X. – 1000 MCM Copper XHHW-2 Features:
1X Technologies Copper XHHW-2 is Available in sizes 18 AWG through 2000 MCM. For 1 AWG through 4/0 AWG, sequential foot markings on master reels only unless otherwise specified. 1000 MCM Copper XHHW-2 is Sunlight Resistant in all colors. 1000 MCM Copper XHHW-2 is rated for cable tray (CT) use and complies with IEEE 1202/FT4 (70,000 Btu/hr) flame test and ICEA T-29-520 (210,000 Btu/hr) flame test.

1X. – 1000 MCM Copper XHHW-2 Standards:
Underwriters Laboratories Standard UL-44.
ASTM Stranding Class B3, B8, B787.
Federal Specification A-A-59544.
Canadian Standards Association C22.2 No. 38.
NEMA WC-70/ICEA S-95-658.
NFPA 70: National Electrical Code (NEC).
UL 1685-FT4/IEEE 1202 (70,000 Btu/hr) Flame Test (1/0 AWG and larger).
ICEA T-29-520 (210,000 Btu/hr) Flame Test.
ARRA 2009; Section 1605 “Buy American” Compliant.

1X. – 1000 MCM Copper XHHW-2 Construction:

Conductors:
Stranded, uncoated bare copper conductors per ASTM-B3, ASTM-B787 and ASTM-B8

Insulation:
Cross-linked polyethylene (XLPE) insulation per UL-44

1X. – 1000 MCM Copper XHHW-2 Specifications:

Size: 1000 MCM
Number of Strands: 61
Insulation Thickness XLPE: 2.03 mm / 0.080 inches
Outside Diameter: 33.32 mm / 1.312 inches
Weight: 3.270 lbs per ft
Allowable Ampacity: 455 Amps at 60ºC / 545 Amps at 75ºC / 615 Amps at 90ºC

Want a Quick Quote?

Let us know these three key points in your message so we can help you fast:

How much do you need?

Provide a description of the cable – like AWG size, Color of Jacket / Conductors, Shielding, Armor type, Flexibility, etc.

Where will your order deliver, and when would you like it delivered?

SPECIFICATION.

Armor:	Not Standard- but available
Composite:	NO.
Conductor Count:	1 CONDUCTOR.
Conductor Material:	BARE COPPER.
Conductor Size:	1000 KCMIL (AKA MCM).
Conductor Type:	STRANDED.
Earth/Ground Wires:	NO.
Insulation Material:	XLP-CROSS LINKED POLYETHYLENE.
Jacket Color:	BLACK.
Jacket Material:	UNJACKETED/NON-SHEATHED.
Product Type:	XHHW-2.
Screen/Shield:	UNSHIELDED.
Temperature Rating:	90 DEGREES CENTIGRADE.
Voltage Range:	600V.

NOTES: 1X Technologies 1000 MCM Copper XHHW-2 is Suitable for use in Health Care Facilities per Section 517.160 of the National Electrical Code. Where a dielectric constant of less than 3.5 may be specified. If needed we can supply no lube technology. Contact our 1X Master Distribution team for No Lube XHHW.

1000 MCM Copper XHHW-2 conductors comply with the following: ASTM – B3, B8 (7, 19, 37, 61 Strands). B787 (19 Wire Combination Unilay Strand). UL Standard 44. NOM-ANCE 90° C. Federal Specification A-A-59544. CT Rated sizes 1/0 AWG – 1000 MCM Copper XHHW-2. Gas and Oil Resistant II sizes 8 AWG through 1000 MCM Copper XHHW-2. National Electrical Code, NFPA 70 – 2011 Edition. NEMA WC 70 Construction Requirements. FT4/IEEE 1202 – 1000 MCM Copper XHHW-2 down to 350 MCM. RoHS/REACH Compliant.

1X Technologies 1000 MCM Copper XHHW-2 – copper conductors are annealed (soft) copper. Insulation is an abrasion, moisture, and heat resistant thermoset cross-linked polyethylene (XLP). 1000 MCM Copper XHHW-2 is marked sunlight resistant. Colors are available for you, as well as stripes and custom printing.

Why order from 1X?

Quality

Our name – 1X Technologies- stands for quality. It stands for Innovation. Most of all it stands for Trust. Our stakeholders can trust that 1X will always adhere to doing business the right way, caring for our people, our planet, and focusing on how our products can enhance the world. In our continued pursuit of perfection we utilize lean – cellular manufacturing principles and six sigma methodology in all our processes. Why?

Cellular Manufacturing allows 1X to rapidly manufacture your orders fast. Typical Turnaround time for our 300 Volt Cables is less than 1 week, and our 600V cables is typically less than 2 weeks! Whether you need hook up or lead wire… Whether you need rare product like 1000 MCM Copper Wire… Whether you need custom multi-conductor cable… We proudly stand behind every one of our products.

Confidence

Selecting the right manufacturer is very important to your success. Working with the right supplier gives you an edge in purchasing. In turn this helps you drive more revenue. Partnering with 1X means entering into a trusting partnership that will last for years.

From our initial concept and engineering design to our production and testing, we work together with you. We listen to our customers to provide support throughout the lifecycle of the product. You matter.

When you need hands on assistance with research and development think 1X. When you need the very best technical support think 1X. When you need a first article built fast think 1X. When you need a quality cable, think 1X.

Our customers rely on our knowledgeable customer service team. They expect to be serviced by the most experienced technical support and engineering staff. You can count on a quality product, and world class experience each and every time you work with 1X Technologies.

Responsibility

Safety and environmental sustainability take priority in every product we manufacture. We Manufacture and Supply UL, CSA, CE, and VDE certified material. SGS/Intertek tested material. We also supply quality RoHS compliant products. We care about more than just making the best Wire & Cable. We care about making the best future for generations to come.