Wire & Cable Type:

JUMPER CABLE RED 5/15 kV Non-shielded Electrical Equipment Cable (EPR) Ethylene Propylene Covering  

SCOPE: 

This specification covers a JUMPER CABLE RED 5/15 kV single conductor electrical equipment cable for use in dry locations only. Construction consists of a stranded bare copper conductor, semi-conducting tape, and EPR covering. 

JUMPER CABLE RED 5KV/15KV USES: 

Electrical Equipment Cable is used as power leads in switchgear and other electrical equipment. Electrical equipment manufacturers are required to perform their own qualification tests and production tests to qualify this cable for use in their application – and to applicable industry standards. No representations and warranties are made by 1X Technologies as to fitness for a specific purpose or use. 

These Jumper cables shall be located in areas where only qualified personnel will have access. Prolonged contact with grounded surfaces and sharp bends must be avoided with this 5kV/15kV Jumper Cable. 

1XTECH® JUMPER CABLE RED 5KV/15KV SPECS, AWG Sizes, Amps/Ampacity

• According to ICEA S-97-682, ICEA S-75-381/NEMA WC-58, ASTM B172, ASTM B 33, UL 1072
• Conductors: Flexible strand tin-coated copper, ASTM B-172, and ICEA S-75-381
• Separator: Synthetic semi-conducting tape separator between the conductor and insulation
• Insulation: Ethylene-propylene rubber (EPR), UL 1072
• Jacket: Red heavy duty CPE thermoset compound, ICEA S-75-381 sec 3.22
• * All values should be considered nominal and subject to normal manufacturing tolerances. ** Ampacities are based on single conductor cables isolated in air, conductor temperature of  90°C, and ambient air temperature of 40°C per Table 310.60(C)(69) of the 2014 NEC.

This product complies with European Directive 2002/95/EC (RoHS)  The customer will accept all factory lengths and +/- 10 percent of the total order requested.  The information presented here is, to the best of our knowledge, true and accurate. Since conditions of use are beyond 1XTech’s control all product data presented is for informational purposes only and does not create a binding obligation or liability on 1XTech or confer any rights on any customer. The sale of products(s) is conditioned upon acceptance of a purchase order subject to 1XTech disclaims all liability in connection with the use of the information contained herein or otherwise.

1XTech JUMPER CABLE RED 5KV/15KV Sizes

Sizes range from 4 AWG to 500 KCMil – Single Conductor, and larger custom sizes may be manufactured up to 4000 KCMIL per customer request.

4 AWG JUMPER CABLE RED 5KV/15KV

• Jumper Cable Size: 4 AWG Jumper Cable
• Voltage: 5KV/15KV
• 4 AWG Jumper Cable Ampacity — Amperage: 150 Amps
• Weight per 1000 Feet: 330 lbs.
• 4 AWG Jumper Cable Dimensions, Outside Diameter  O.D. — .675 In.
• RoHS: Yes
• UL / CSA: Yes