Belden 9829 Cable – [Price/ Pricing/ Cost,Equal/Equivalent,Specs]
Manufacturer “EZ” Part Number: 1XB9829EQ (Compare to Belden 9829 Cable)
Description:
1XTech® Lo Cap Computer EIA RS-232/422 Cable, 2-Pair, 24 AWG stranded (7×32) tinned copper conductors, polyethylene insulation, overall foil Shield (100% coverage) + tinned copper braid shield (65% coverage), 24 AWG stranded tinned copper drain wire, PVC jacket. Made in the USA.
Applications:
RS-232 extended distance applications; RS-422 applications; computer communications; low voltage analog signals (4-20ma, 0-10v); low voltage digital control (24v); line level audio; panel wiring and applications where Belden 9829 has previously been utilized.
Features:
- Buy American Act approved: Yes – Made in the USA
- Approved for use by the U.S. Army Corps of Engineers
- Premium American made, high-quality, performance effective substitute for Belden 9829.
Standards & Compliance:
- NEC/UL specification: High Temperature Electronics – NEC Article 800-CM
- RoHS Compliant: Yes – APAC RoHS II
- EU CE Mark: Yes
- European Directive Compliance: EU Directive 2015/863/EU (RoHS 2 amendment), EU Directive 2011/65/EU (RoHS 2), EU Directive 2012/19/EU (WEEE)
- Flammability / Fire Resistance: UL 1685 FT4 Loading, IEC 60332-1-2
- Environmental Suitability: IndoorSustainability: CA Prop 65, LEED, EU 2014/95/EU, ISO9001, 1XTech® Earth Pledge
1XTech® Belden 9829 Equal Manufacturing Specifications: 1XB83604EQ
Size: 24 AWG
Conductor Count: 4 Conductors (2 Pairs)
Number of Strands: 7 x 32
Conductor Material: Tinned Copper
Conductor Colors: Pair 1 – White Blue, Blue White Pair 2 – White Orange, Orange White
Insulation Type: PE – Polyethylene or 1XTECH® SR-PVC
Insulation Thickness (Conductor): 0.011 inches
Shield Type: Overall Bi-Laminate Foil (Alum+Poly) (100% coverage) + Tinned Copper Braid (85%)
Jacket Type: PVC – Polyvinyl Chloride (Thickness 0.035 in)
Jacket Color: Chrome (Gray)
Outside Diameter (Nominal): .291 inches / (7.39 mm)
Weight: 40lbs per 1000 Feet
Voltage: 300 Volts UL (CM), 30 V (AWM 2919)
Operating Temperature Range: -30C to + 80C UL Temp Rating: 80C
Nominal Capacitance: Cond to Cond 15.5 pf/ft nom Cond to Shield: 27.5 pF/ft
Cross Reference: Belden Part Number 9829
Notes: Teflon® is a DuPont trademark. Belden® is a trademark of Belden Inc.
Earning the Trust of the Army Corps of Engineers
When the Army Corps of Engineers came to us to manufacture special length reels with a custom print legend, and have the order completed just 2 weeks when many others turned them down we jumped at the opportunity.
Not only did we save the Army Corps of Engineers over 30% on their large project, saving you the tax payers money, but we also produced the copper belden equivalent cable 3 times as fast as they had been quoted for material from Belden.
When the cable arrived on site nearly a week early, we received a call from the buyer who was shocked. He was sure we were not going to fulfill our promise of getting him the cable within the time we quoted as it was 6 weeks faster than Belden.
He said he had his field supervisor snip a couple feet off the end of the first reel they pulled off the truck and by God, it was as good or better than what they had previously been using.
Since this first success story and earning the trust of the United States Army Corps of Engineers we have begun manufacturing many more equals, equivalents, and alternatives to Belden Cable.
We realized there was a major opportunity to offer considerable value of extremely high quality equals to Belden Cable, with faster turn-around times, and with the potential to lower our customers cost.
Continued Business, Continual improvement
Specifically, since initially manufacturing our first order for a copper cable substitute for Belden’s part number 9829 we have continued to fill orders for the U.S. Army Corps of Engineers and many others.
In particular, our customers have trusted us to produce the very best wire and cable possible. Certainly, now that we have made so many of these highly technical products with success over the years we are the go-to supplier when Belden Equals are required.
Indeed, we know that if we can impress the United States Federal Government and the Army Corps of Engineers we can do right by you on your project too!
Remember, you call 1X Technologies “Because you require quality, quickly!”